Expect about two correction cars a month in our shop. Common faults include melted craft glue, missing glue, stars that retreat above the cloth, damaged trim and poor power or engine placement. We upholster and redo rather than “spot repair.” Upgrades are possible when there is room to hide the hardware—with limits on dual-color conversion.
Symptom → what it usually means
| What you notice | Likely cause | Typical path forward |
|---|---|---|
| Stars poking or uneven after summer | Craft glue softened or failed. | Full upholstery and redo with proper process. |
| Stars vanishing into the roof, leaving holes | Tips not retained; fibers retreated above the cloth. | Redo the panel—holes are not a wipe-away fix. |
| Visible light engine or dead zones | Poor mounting or power that never reached the box. | Relocate/rebuild electrical and finish plan in a redo. |
| Creases, scratched pillars, wrong sun visors | Careless removal and reassembly. | Correct trim during a professional panel rebuild. |
How often bad installs arrive
Correction work shows up pretty often—more often than we would like. Roughly two cars a month arrive because a previous DIY attempt or outside shop left the cabin worse than stock.
That volume is useful context for buyers shopping the lowest bid. The market is full of first attempts. Some succeed; many create the inventory we later rebuild.
If your car already has stars and something feels wrong, document it early: daylight photos of the cloth, night video of the field and notes about when the problem started.
The failure list we see on the bench
Sagging or uneven stars from melted glue that need to be recut are common after heat seasons—especially when hardware-store craft adhesive was used. Equally shocking: installs with no glue at all, leaving tips with nothing holding them in the cloth.
Stars that disappear back above the headliner leave holes in the face fabric. That is not a “push it back through” afternoon project; the panel is already compromised.
Trim quality tells on the installer. We see sun visors reinstalled incorrectly, pillars scratched during removal, and crease lines pressed into the headliner from rough handling. On the electrical side, power may never reach the light engine, or the box is mounted where you can see it—defeating the point of a hidden system.
Why we do not “just repair” the headliner
When a starlight roof has failed in these ways, Oddie’s Customs does not offer cosmetic spot repairs as the real solution. The headliner needs to be upholstered and redone. Patching a field of holes, glue ghosts and uneven tips produces a permanent “fixed” look that still photographs like damage.
A redo resets adhesive process, fiber map, tip finish and trim assembly. It costs more than the first bargain install—which is exactly why process quality belongs in the original purchase.
Be wary of anyone who promises to glue down poking stars in place without assessing the whole panel. You may buy a short delay before the next failure.
What a professional assessment includes
We look at the cloth face, the rear of the panel when accessible, the light-engine location, power strategy and neighboring trim. A single dark zone can be optical, electrical or both.
Bring any paperwork from the previous shop or kit. Knowing the intended star count and control method saves time even when the execution failed.
Honest assessments sometimes end with “this should be rebuilt,” not “we can tweak three tips.” That clarity is kinder than a hopeful micro-repair quote.
Upgrades on an existing system
Yes—you can upgrade if the car has space for the hardware to stay hidden. That includes adding regular stars and shooting-star effects when the roof and mounting plan allow.
Color-mode conversions have a hard limit: regular single-color star fields cannot be converted into dual color. Dual-color systems can be converted to single color if you decide you want a simpler look later.
Upgrades are not a loophole around a destroyed headliner face. If the cloth is full of holes or glue failure, plan the upholstery redo first, then the enhanced field.
DIY aftermath versus bargain-shop aftermath
DIY failures often show missing process: no adhesive discipline, rushed tip finishing, power tapped wherever was convenient. Bargain-shop failures can look similar, with the added issue of trim damage from fast commercial removal.
Neither path is hopeless. Both usually require accepting that the next invoice is a rebuild invoice. Keeping the failed kit’s remote as a souvenir does not reduce that scope.
If you are mid-DIY and already unhappy, stop before you add more holes. An incomplete attempt is sometimes easier to rebuild than a fully glued wrong attempt.
How to brief a correction job
Send year, make, model, roof photos in daylight, a night video, and a short history of who installed the system. Note any summer timeline if tips began poking after heat.
List what you want the redo to achieve: stock-looking cloth quality, higher star count, shooting stars, dual color (if hardware will be new) or simply a field that finally looks even.
Oddie’s Customs would rather quote a complete correction than inherit an infinite series of tip visits. The goal is a cabin you do not have to explain.
- Daylight cloth photos and night field video.
- Previous installer or kit details if known.
- Trim damage notes (pillars, visors, creases).
- Upgrade wish list and dual-color constraints.
Common questions
01How often do you see failed starlight installs?+
About two cars a month—more often than we would like—covering both DIY and outside-shop work.
02Can you glue poking stars back down without replacing the headliner?+
We do not treat that as a proper fix. Compromised panels need upholstery and a full redo.
03Can I upgrade my existing stars?+
Yes if there is space to keep hardware hidden. You can add stars and shooting stars. Single-color systems cannot become dual color; dual color can become single color.
04Why are there holes where stars used to be?+
Fibers that were not retained can retreat above the headliner, leaving empty punctures. That condition requires a panel rebuild.
05The light engine is visible—can you just move it?+
Relocation can be part of a correction, but visible mounting often rides along with other process problems. Expect a full assessment rather than a single bracket move.
Show us what you have in mind.
Send your year, model and roof type, plus the look you want. Looking for a matching installation photo? We may have an example beyond the public gallery.
Start your build brief